How can connect TP-Link Router

Here’s how to connect and set up a TP-Link router:

---

✅ TP-Link Router Setup – Step-by-Step

🧰 What You Need

• TP-Link router
• Modem (if applicable)
• Ethernet cable
• Power supply
• Mobile/Laptop

---

🔌 Step 1: Connect the Hardware

1. Turn off the modem (if using one).
2. Connect modem to router:
   • Plug one end of the Ethernet cable into the modem.
   • Plug the other end into the blue WAN port of the TP-Link router.
3. Power on the modem, then the router.
4. Wait for 1–2 minutes for lights to stabilize.

---

📱 Step 2: Connect Your Device

You can do this wirelessly or with a LAN cable:

• Wi-Fi: Look for the default SSID (Wi-Fi name) and password on the label under the TP-Link router.
• LAN Cable: Connect your laptop directly to one of the yellow LAN ports.

---

🌐 Step 3: Login to Router Settings

1. Open a browser on your connected device.
2. Type 192.168.0.1 or 192.168.1.1 in the address bar.
   • You can also try: http://tplinkwifi.net
3. Login using:
   • Username: admin
   • Password: admin (or see label under the router)

---

⚙️ Step 4: Set Up Wi-Fi and Internet

1. Use the Quick Setup Wizard.
2. Select your Internet connection type:
   • Usually Dynamic IP (DHCP), but check with your ISP.
3. Set a new Wi-Fi name (SSID) and password.
4. Save and reboot the router.

---

✅ Step 5: Test Internet Connection

• Connect your mobile or PC to the new Wi-Fi.
• Open a website to confirm it's working.

---